UV LED 경화형 칼라코팅
- Author(s)
- 이수진
- Issued Date
- 2009
- Abstract
- The development of high power short wavelength light emitting diodes (LED) in the late 90s created the potential of a solid state UV curing source. The benefit factors of the LEDs can be introduced as low heat, portability and low power consumption. These advantages are particularly attractive for the curing of various adhesives, inks, and coatings in applications where dimensional stability of the substrates is required. In this work, we investigated the effects of the inert atmospheres, the photosensitizer, the dual curing systems, and the pigment on the curing behavior and the surface properties of UV-LED curable color coating systems by photo-DSC, FT-IR/ATR, and stain resistance analysis. The results showed that the polymerization reactivity and the conversion for the formulation system with ITX and for the process system in inert gases were higher than the corresponding values for the systems without ITX and ambient system. With the demonstration, we could conclude that the dual curing (UV-LED -> UV) system was a strong candidate method to optimize the process for the system where both excellent surface hardness and through curing are required.
- Alternative Title
- UV LED curable color coating
- Alternative Author(s)
- Lee, Soo Jin
- Affiliation
- 조선대학교
- Department
- 일반대학원 첨단부품소재공학과
- Advisor
- 홍진후
- Awarded Date
- 2010-02
- Table Of Contents
- 제 1 장 UV-LED 경화형 칼라코팅
제 1절. 서 론...............................1
제 2절. 연구배경 및 내용..............6
제 3절. 실 험..............................11
1. 경화조건...............................11
2. 실험재료...............................11
3. 배합.....................................13
4. Photo-DSC (Photo-differential scanning calorimetry) 측정.............................................14
5. FT-IR / ATR Imaging Microscope 측정....15
6. Stain resistance 측정.............................15
7. 진자경도 시험........................16
제 4절. 결과 및 고찰....................17
1. UV-LED 경화형 칼라코팅의 경화특성.......17
2. 불활성 기체의 영향...............22
3. 광개시제 및 증감제 효과........24
4. Dual Curing........................33
5. 안료색상별 경화도 비교........38
제 5절. 결 론.............................41
참고문헌..................................42
- Degree
- Master
- Publisher
- 조선대학교
- Citation
- 이수진. (2009). UV LED 경화형 칼라코팅.
- Type
- Dissertation
- URI
- https://oak.chosun.ac.kr/handle/2020.oak/8426
http://chosun.dcollection.net/common/orgView/200000239203
-
Appears in Collections:
- General Graduate School > 3. Theses(Master)
- Authorize & License
-
- AuthorizeOpen
- Embargo2010-01-25
- Files in This Item:
-
Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.