CHOSUN

하수슬러지 회전체형 건조로와 일체형 활성탄화로 개발

Metadata Downloads
Author(s)
정동현
Issued Date
2009
Abstract
Treatment of sewage sludge is a difficult to carriage and proposal because high content of water, generation of odor and high cohesion. To treatment of this sewage sludge, carbonization is attraction the attention. In this study, the adsorption characteristics and the optimum operated conditions are confirmed to prepare adsorbent derived sewage sludge and the combined carbonization activator is developed. Also, the rotor type drier is developed for satisfy content of water suitable carbonization-activation reaction and is confirmed for optimum dried conditions. With the result that, optimum operated conditions of the drier are confirmed what drier load "62.5 kg/m3·hr", residence time "26.2 min" and temperature "330 ℃", respectively. At this time, content of water, drying efficiency, and volume loss are shown that 10±2%, 88%, and 60%. Drying characteristics of sewage sludge are analyzed about measuring content of water, elemental analyzer, EDX and GC. Optimum operated conditions of carbonization activator are confirmed what activated temperature “840 ℃”, input of steam “70 g/min”, activated time “30 min” and feeding amount of dried sludge “10.8 kg/d”, respectively. At this time, the iodine adsorptivity is maximized that 328.1 mg/g. Through this result, activated carbon derived from sewage sludge is confirmed to being pore development. And also, by using nanoPOROSITY, SEM and EDX are confirmed that pore development and structure, element compound and content.
Alternative Title
Development of Rotor Type Drier and Combined Carbonization Activator for Sewage Sludge
Alternative Author(s)
Jung, Dong Hyun
Affiliation
일반대학원 환경공학과
Department
일반대학원 환경공학과
Advisor
전영남
Awarded Date
2009-02
Table Of Contents
List of Tables
List of Figures
ABSTRACT

제1장 서론 1

제2장 이론 및 고찰 3
제1절 하수슬러지의 발생 및 처리현황 3
1. 하수슬러지의 발생 3
2. 하수슬러지 처리현황 4
제2절 하수슬러지 건조 5
1. 건조 메카니즘 5
2. 하수슬러지 건조 기술 8
제3절 하수슬러지 탄화 및 활성화 9
1. 탄화 메카니즘 9
2. 활성화 메카니즘 10
3. 하수슬러지 탄화 및 활성화 기술 12

제3장 실험장치 및 방법 13
제1절 실험장치 13
1. 회전체형 건조로 13
2. 일체형 활성탄화로 16
제2절 실험방법 19
1. 회전체형 건조로 19
2. 일체형 활성탄화로 20
제3절 분석방법 22
1. 함수율 22
2. 요오드 흡착능 23
3. 질소흡착 24
4. SEM 24
5. EDX 25

제4장 실험결과 및 고찰 26
제1절 회전체형 건조로 26
1. 체류시간 31
2. 부하율 32
3. 온도 33
제2절 일체형 활성탄화로 34
1. 활성탄화 온도 42
2. 수증기 주입량 43
3. 활성탄화 시간 44
4. 건조슬러지 주입량 45

제5장 결론 46

참고문헌 47
Degree
Master
Publisher
조선대학교
Citation
정동현. (2009). 하수슬러지 회전체형 건조로와 일체형 활성탄화로 개발.
Type
Dissertation
URI
https://oak.chosun.ac.kr/handle/2020.oak/8195
http://chosun.dcollection.net/common/orgView/200000237890
Appears in Collections:
General Graduate School > 3. Theses(Master)
Authorize & License
  • AuthorizeOpen
  • Embargo2009-02-04
Files in This Item:

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.