CHOSUN

다중 센서를 이용한 포장 공정 제어 시스템 설계

Metadata Downloads
Author(s)
송재근
Issued Date
2006
Abstract
This paper describes the design and implementation of a wrapping process using multiple sensors. The wrapper wraps a product of cylindrical shape such as rolled and wrap it with quality which guarantees safe protection of the wrapped product against ware and time over long period of transportation and storage. Also, it is required to avoid the damage of the product during the wrapping process and to provide safe and convenient human machine interface.
To meet these requirements, the wrapping process includes many kinds of sensors. The sensors are encoders, proximity switch, photo electric sensors, and tension meters. These sensors are included in the parts of head, ring lifter, top sheet feeder, conveyor, and load stabilizer of the machine. The controller detects the status of the wrapping process and the material to be wrapped through sensors and controls the overall process. The developed process wraps the material faster and produces better wrapping quality than the previous wrapping machines.
To describe the above, this paper consists of the following chapters. The chapter 1 introduces the wrapping process. Chapter 2 describes and analyzes previous wrapping machine. Chapter 3 proposes and details the improved wrapping process which uses sensors for intelligent operation. Chapter 4 discusses the control flow of the process. This chapter shows how the sensor data are used for control of the process. Chapter 5 concludes the paper with discussions on the developed wrapping process and further research topics.
Alternative Title
Control System Design of Wrapping Process Using Multiple Sensors
Alternative Author(s)
Song, Jae Keun
Affiliation
일반대학원 제어계측공학
Department
일반대학원 제어계측공학과
Advisor
高 樂 溶
Awarded Date
2007-02
Table Of Contents
제 1 장 서 론 1
제 1 절 연구배경과 목적 1
제 2 절 연구 방향 3
제 3 절 논문의 구성 3
제 2 장 현재까지 제작된 포장 설비 4
제 1 절 기존 포장 설비들의 구조 및 포장 방식 4
제 2 절 기존 포장 설비들의 단점 6
제 3 장 Ring Type 포장기의 구조 6
제 1 절 Head 7
제 2 절 Ring Lifter 18
제 3 절 Top Sheet Feeder 27
제 4 절 Conveyor 34
제 4 절 Load Stabilizer 38
제 4 장 Ring Type 포장기의 제어 41
제 1 절 Controller 41
제 2 절 Data 연산 및 처리 42
제 3 절 Control Flow Chart 45
제 4 절 Noise 방지 대책 48
제 5 장 결 론 48
Degree
Master
Publisher
조선대학교
Citation
송재근. (2006). 다중 센서를 이용한 포장 공정 제어 시스템 설계.
Type
Dissertation
URI
https://oak.chosun.ac.kr/handle/2020.oak/6581
http://chosun.dcollection.net/common/orgView/200000233986
Appears in Collections:
General Graduate School > 3. Theses(Master)
Authorize & License
  • AuthorizeOpen
  • Embargo2008-09-01
Files in This Item:

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.