CHOSUN

장섬유강화 복합재료의 사출성형에 있어서 섬유배향에 관한 연구

Metadata Downloads
Author(s)
이강
Issued Date
2008
Abstract
This dissertation aims to systematically study the various phenomena which arise from injecton molding of plastic composites reinforced with long fiber. Seperation and orientation result from the difference in flow of matrix and fiver during the molding process of fiber-reinforced plastic composites. There has been many research on these matters in consideration of compression molding of composites which are composed of fiber mats. However, there has been no research on the molding conditions which affect the fiber content in injection-molded fiber-reinforced composites.
This thesis experimentally studies the influences of such molding parameters such as fiber length and content affecting on distribution of fiber content in products.
Long fiber-reinforced composites are injection-molded in order to measure the orientation in injection-molded products, and the products are photographed with soft x-rays. The intensity of the photograph is applied by an image scanner, and the fiber orientation distribution of products is measured by using an image-processing technique. Finally the relationship of the weight rate in fiber content of the product and fiber orientation function J and that of the injection molding condition and fiber orientation function J are investigated.
Alternative Title
A Study on the Fiber Orientation of Injection-Molded Long Fiber Reinforced Polymeric Composites
Alternative Author(s)
Lee Kang
Affiliation
교육대학원 기계·금속교육
Department
교육대학원 기계.금속교육
Advisor
윤성운
Awarded Date
2009. 2
Table Of Contents
목 차 ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥Ⅰ
List of Figures ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ Ⅲ
List of Table ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ Ⅴ
Nomenclatures ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥Ⅵ
Abstract ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥Ⅶ

제 1 장 서 론 ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥1
1.1 연구배경 ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥1
1.2 연구목적 및 내용 ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥5

제 2 장 이 론 ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥6
2.1 섬유배향함수의 측정이론‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 6
2.1.1 섬유배향함수‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥6
2.1.2 농 도 법‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥7

제 3 장 실 험 ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥12
3.1 기계적 성질 ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥12
3.2 섬유배향측정‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥13
3.2.1 직사각형 성형품의 섬유배향 분포측정 ‥‥‥‥‥‥‥‥‥‥‥‥‥13
3.2.2 Short-shot 성형품과 두께방향의 섬유배향 ‥‥‥‥‥‥‥‥‥‥‥15

제 4 장 결과 및 고찰 ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥18
4.1 섬유배향측정 ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥18

제 5 장 결 론 ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥58

참고문헌‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥59
Degree
Master
Publisher
조선대학교
Citation
이강. (2008). 장섬유강화 복합재료의 사출성형에 있어서 섬유배향에 관한 연구
Type
Dissertation
URI
https://oak.chosun.ac.kr/handle/2020.oak/4954
http://chosun.dcollection.net/common/orgView/200000237756
Appears in Collections:
Education > Theses(Master)(교육대학원)
Authorize & License
  • AuthorizeOpen
Files in This Item:

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.