CHOSUN

생체용 Ti-xNb-ySi합금의 미세조직 및 전기화학적 특성

Metadata Downloads
Author(s)
김비룡
Issued Date
2006
Abstract
As biomedical metal materials implanted directly in human body, for the purpose of developing Ti alloys which are excellent at corrosion resistance, biological stability and biocompatibility in human body, moreover, similar to human body in mechanical dynamic properties, I studied by adding Nb, Si to Ti respectively that are biologically stable element. In order to investigate the microstructure and electrochemical properties of biomedical Ti-xNb-ySi alloys were melted by using a vacuum furnace(vacuum arc melting system. SVT, KOREA) and then homogenized for 24hr at 1050 ℃. The samples were cut and polished for microstructure and corrosion test. The microstructures were conducted by using optical microscope(OM) and scanning electron microscope(SEM). The corrosion behaviors were investigated using potentiosat(EG&G Co, 263A) in 0.9% NaCl solution at 36.5±1℃
As Nb was increased by 20 %, 40 % respectively at the Ti-Nb-Si alloy, α + β phase and β phase were molded. As a result of X-ray diffractometry analysis, the peak of matrix β phase was appeared high, and it could be confirmed that there is a peak of α-martensite phase, which the strength is low relatively. In addition a (30)face peak of ω phase could be confirmed at Ti-20Nb-0.2Si alloy, but ,when Nb content was increased, the peak of ω phase wasn't observed. A value of hardness was measured that α + β type Ti-20Nb alloy was 457 HV and β type Ti-40Nb alloy was 312 HV on the average according to the investigation of electrochemical corrosion behaviors at 36.5±1 ℃, 0.9 % NaCl electrolyte, the more Nb content increased, the more corrosion resistance increased, and β phase Ti-Nb alloy is more better in the part of corrosion resistance than α + β phase.
Alternative Title
Microstructure and Electrochemical Properties of Biomedical Ti-xNb-ySi Alloys
Alternative Author(s)
Kim, Bi-Ryong
Affiliation
조선대학교 대학원
Department
산업대학원 금속재료공학과
Advisor
고제만
Awarded Date
2007. 2
Table Of Contents
LISTOFTABLES = Ⅰ
LISTOFFIGURES = Ⅳ
ABSTRACTS = Ⅵ
제 1 장 서론 = 1
제 2 장 이론적 배경 = 3
제 1절 Ti 합금의 특성 = 3
제 2절 내식성에 미치는 합금원소의 영향 = 7
제 3절 생체재료 = 7
3 1 생체재료의 개요 = 7
3 2 생체용 금속재료의 필요조건 = 8
3 3 생체용 재료의 세포독성 = 8
제 4절 전기화학적부식 = 13
4 1 금속의 전기화학적 반응 = 13
제 3 장 실험 방법 = 17
제 1절 합금제조 및 열처리 = 17
제 2절 시편제작 및 미세조직 관찰 = 17
제 3절 경도 시험 = 19
제 4절 부식 시험 = 19
4 1 동전위시험 = 19
제 4장 실험 결과 및 고찰 = 23
제 1절 미세조직 및 경도시험 = 23
제 2절 Ti 합금의 부식특성 = 31
제 5장 결론 = 33
- 참고문헌- = 34
Degree
Master
Publisher
조선대학교 대학원
Citation
김비룡. (2006). 생체용 Ti-xNb-ySi합금의 미세조직 및 전기화학적 특성
Type
Dissertation
URI
https://oak.chosun.ac.kr/handle/2020.oak/1906
http://chosun.dcollection.net/common/orgView/200000232965
Appears in Collections:
Engineering > Theses(Master)(산업기술창업대학원)
Authorize & License
  • AuthorizeOpen
Files in This Item:

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.